Generac GP2200I
Compact and fully-enclosed, with a lightweight design
- Quiet and neighbor friendly, fully enclosed design dramatically reduces noise levels
- TruePower™ technology provides clean, stable power ideal for sensitive electronics, tools, and appliances
- Compact size and light weight make transportation easy with built-in handle
- Economy mode automatically adjusts engine speeds to save fuel and reduce sound emissions
- Integrated off/run/choke knob simplifies startup procedures
- LED indicators alert when unit is low on oil, overloaded, or ready-to-use
- USB port to charge mobile devices
- Parallel ready to connect 2 GP2200i inverter generators for twice the power, parallel kit not included
- Low-oil level shutdown automatically safeguards engine from incurring damage.
- Covered outlets provide added protection from the environment
- Product Series: GP2200i
- Model (Configuration): 7117-0 (50-State/CSA)
- AC Rated Output Running Watts: 1700
- AC Maximum Output Starting Watts: 2200
- Rated AC Voltage: 120 VAC
- Rated AC Frequency: 60 Hz
- Rated 120 VAC Amperage: 14.1
- Outlets: (1) 12 VDC Outlet, (1) 1.5A, 5VDC USB Outlet, (1) 120V, 20A 5-20R Duplex Outlet
- Circuit Breaker: AC 15A
- Economy Switch: Yes
- Engine Displacement: 80cc
- Engine Type: OHV
- Engine RPM: Variable
- Recommended Oil: 10W-30
- Oil Capacity Qt (Lts): 0.36 (0.35)
- Lubrication Method: Splash
- Fuel: Gasoline
- Choke Location: On Control Panel
- Fuel Shut Off: On Control Panel
- Starting Method: Recoil Pull Start
- Low Oil Shutdown: Low Level
- Neutral Bonded to Ground: No
- Floating Neutral: Yes
- Start Switch Type: Off/Run/Choke Knob
- Start Switch Location: On Control Panel
- Fuel Tank Capacity Gal (Ltrs): 1.2 (4.5)
- Run Time at 25% of Rated Load (Hours): 10.75
- Measurements: 19.7″L x 11.4″W x 17.9″H
- Weight: 46.6 lb.
Quantity: 2
Available for Order & Store Pickup (Fill Out Form Below)
| CLUTCH | |
|---|---|
| Clutch | Electric |
| CUTTING | |
|---|---|
| Cutting Capacity | 1 ft high grass |
| Cutting Width | 44″ |
| Maximum Cutting Speed | 5 Mph |
| Number of Blades | 2 |
| DIMENSIONS | |
|---|---|
| Height | 27″ |
| Shipping Weight | 461 lbs. |
| Weight | 270 lbs |
| Width | 56″ |
| Overall Length | 132″ |
| Shipping Dimensions | 66″ W x 49″ W x 36″ H |
| ENGINE | |
|---|---|
| Air Filter | Dual-Element |
| Cooling Methods | Air Cooled |
| Displacement | 340cc |
| Engine Type | OHV |
| Ft Lbs Torque | *13.3 ft-lbs gross torque (per SAE J1940) |
| Horsepower | 9.1 HP |
| Lubrication | Splash |
| Make | DR |
| Number Of Cylinders | 1 (Cast-Iron Sleeved) |
| Oil Capacity | 37oz |
| Oil Filter | No |
| Oil Type | SAE 30W HD |
| Pre Cleaner | Yes |
| Starting Type | Manual |
| Choke/Primer | Choke |
| FUEL_SYSTEM | |
|---|---|
| Fuel Capacity | 3.5 L (.92 gal) |
| Fuel Shutoff Value | No |
| Inline Fuel Filter | No |
| GENERAL | |
|---|---|
| CARB Certified | Yes |
| Assembly | Yes |
| WHEELS_TIRES | |
|---|---|
| Number of Tires | 4 |
| Tire Size | 11″ x 4″ |
| Tread | Turf |
| WARRANTY | |
|---|---|
| Engine Warranty | 2 yrs Residential Use, 1 yr Commercial use |
| Machine Warranty | 2 yrs Residential Use, 90 Days Commercial Use |
| MATERIAL | |
|---|---|
| Deck | Offsets – 5 Positions |
| Frame | 12 Gauge |